|
|
 |
Rexco Partall® Film #10
Rexco Partall® Film #10 is a water/alcohol-based polyvinyl
alcohol (PVA) mold release agent that forms a barrier between
parts and mold surfaces that are still curing (green or recently
reconditioned molds can be reactive). Partall® Film #10, the
original green parting film, is resistant to solvents and
styrene yet is water soluble. Protects against mold hang ups
with polyester and vinylester resins; also used with epoxy and
urethane resins.
PVA is most commonly applied over mold release wax although some
users find success by adding wax over the PVA film (giving a
second part cycle before replacing PVA.) Partall® Film #10 can
also be used as a surface cure agent during gel coat repairs
(locks out air). Now improved for easier lay out Partall® Film
#10 allows application by brush, roller, sponge or cloth as well
as excellent spray characteristics. Available in green or clear
(water-white). Packaged in 1-gallon, 5-gallon and 55-gallon
container sizes. |
